Guide

How to Automatically Receive and Burn DICOM Studies from a PACS

Normally you search the PACS and pull a study across. DICOM Burner can also be set up the other way round: a PACS or modality sends studies to it, DICOM Burner holds them until they have finished arriving, and lists them ready to burn to disc. This is an optional feature, it is off by default, and by default a person still presses Burn.

It is not unattended burning. A drive has one tray and holds one disc, so someone has to load each disc whatever you choose. It also cannot know that a study is clinically complete. It can compare the number of images that arrived with the number the sender announced, when the sender announces one, and it holds back anything that does not add up. Read the limits at the end before you rely on it.

  1. 1

    Note this app's AE title and port

    Open Settings > App Settings... Local AE Title and Local Storage SCP Port are the address a PACS will send to. They default to OPENDICOMBURN and 11113, and the status bar at the bottom of the main window shows the port the Local Storage SCP is running on. This is the same listener DICOM Burner already uses to receive studies retrieved with C-MOVE, so there is no second port to open.

  2. 2

    Turn on Accept pushed studies

    In the section called Receive and burn pushed studies, tick Accept pushed studies (restart required to enable). It is off by default. Turning it on takes effect after a restart. Turning it off makes DICOM Burner stop accepting new studies straight away. The Received and Quarantine tabs, and any studies already listed, stay until you restart.

  3. 3

    Add each allowed sender

    Click Add sender and fill in a Name, the sender's AE Title, and its Address(es). The AE title can be at most 16 characters. Addresses must be IP addresses rather than host names, and you can list several, separated by commas, for a PACS that connects from more than one address. An AE title on its own is not enough because anything that can reach the port could claim it, so DICOM Burner only accepts a study when both the AE title and the address match. The same AE title and address pair cannot belong to two senders. With no senders listed, nothing is accepted, and the app will not save with the feature on until at least one is added. A row that is missing a field is highlighted and is not saved.

  4. 4

    Choose how long to wait

    The box labelled Wait this long after the last image before treating a study as finished (seconds) defaults to 60 and accepts 5 to 3600. DICOM Burner treats a study as finished once no new image has arrived for that long. A pause is not proof that a study is complete, so choose a value comfortably longer than the longest gap your PACS leaves between images.

  5. 5

    Save and restart

    Click Save, then restart DICOM Burner. After the restart, two new tabs, Received and Quarantine, appear alongside Jobs and History. They are not shown at all unless Accept pushed studies is on.

  6. 6

    Set up the PACS to send to DICOM Burner

    On the PACS or modality side, add DICOM Burner as a destination using the Local AE Title, this computer's IP address, and the port from the first step, and make sure the PACS sends from the AE title and address you entered as a sender. How you do that depends on the PACS, so follow its own documentation. If the PACS offers a verification test for a destination, DICOM Burner answers it. This computer must also be reachable on that port, so check Windows Firewall if nothing arrives.

  7. 7

    Send a study and watch the Received tab

    Images are saved to disk as they arrive. About every five seconds DICOM Burner checks for studies that have gone quiet, and once the wait time has passed a study appears in the Received tab with its Study UID, the number of images, when it arrived, a Completeness note, and a Burn button. The tab shows the Study UID rather than a patient name, so make sure it is the study you expect before you burn it.

  8. 8

    Read the Completeness column

    Complete means the sender announced how many images the study contains and that many distinct images arrived. Completeness unverified, shown in amber, means the sender did not announce a count, so nothing confirms the study is whole, and the hover note says to check it before burning. Even Complete is a count check and not a clinical judgement.

  9. 9

    Load a disc and click Burn

    Insert a writable disc and click Burn on the study's row. If no burner is detected, the row says so. DICOM Burner writes the disc, reads the files back to verify them, and then removes the study from the list and deletes its own temporary copy. It keeps a record of what it has burned and refuses to burn the same content a second time. Discs written this way hold the images and a DICOMDIR index, and do not have a viewer added.

  10. 10

    Deal with anything in Quarantine

    A study goes to the Quarantine tab, which shows a red count when something is waiting, if a different number of images arrived than the sender announced, if the same image arrived twice with different content, if more images arrived after the study had been assembled, if it went over a size or image limit, or if the app stopped while the study was arriving or being burned. Each row says what happened. Discard deletes the received images after you confirm. Burn anyway is offered for most reasons, but not when the same image arrived twice with different content or when the app stopped mid-burn, because in those cases what is on the disc cannot be relied on and you need to ask the sender to send the study again or check the disc.

  11. 11

    Optional: start burning without pressing Burn

    This is a second opt-in setting, also off by default, and it is only available while Accept pushed studies is on. Tick Start burning automatically when a blank disc is loaded. It starts when a writable disc is loaded (DICOM Burner detects a supported disc in the drive; it does not check that the disc is empty). It arms when DICOM Burner sees a supported disc go into the drive while it is running, so a disc already in the drive at startup does not arm it. It only applies to studies marked Complete, meaning the image count matched what the sender announced. It then picks the first of those in the order they finished arriving and shows a banner above the tabs with the Study UID and image count, a countdown of 20 seconds, and a Don't burn button. Once a disc is loaded and the countdown ends, the burn starts without anyone pressing a button. Clicking Don't burn stops it, and it does not move on to the next study until you load a fresh disc. Studies marked Completeness unverified are never started this way. After one automatic burn it stays disarmed until the disc is removed and another is loaded, and if no suitable study turns up within 15 minutes it disarms itself.

Limits worth knowing. An AE title and address are not authentication, so keep this computer on a network you trust. The checks are on image counts and duplicates, and cannot confirm that a study is clinically complete. Only disc burning is covered, not USB copy or ISO export. Once 20 studies are arriving at the same time, further images are refused, and a study over 20,000 images or 8 GB is quarantined. These are built-in limits that are not shown on the Settings screen. If you decide not to use the feature, leave Accept pushed studies unticked and DICOM Burner behaves exactly as before.

Get DICOM Burner free

Free DICOM burning software for Windows — query PACS, burn to CD/DVD, copy to USB.